Manufacture and Supply of Electrolyzer 500 GPH with Acrylic Casing

August 1, 2022 at 1:40 PMadmin
When DC (direct current) is passed through titanium electrodes to the electrolyte, the chlorides will disassociate to form chlorine. [More]

Titanium Electrolyzer 450 GPH and 500 GPH for Brine Chlorination

July 30, 2022 at 5:31 PMadmin
The best prevention of epidemics is to use microbiologically clean non polluted water, preferably deep ground water as drinking water. Unfortunately, in some regions this is not possible for hydro geological or quantitative reasons. In these regions, surface water is used, which often has to be disinfected. [More]

Titanium Electrolyzer 500 GPH / 200 GPH for Brine Chlorination

July 26, 2022 at 2:28 PMadmin
Electro chlorination is the process of generating a solution of Sodium Hypochlorite from three common place and readily available materials - salt, water and electricity. This process is economically proven to provide a low cost of ownership over the life of the systems. [More]

Titanium Electrode Assembly for Brine

February 5, 2022 at 1:43 PMadmin
Electro chlorination is the process of using salt, water and electricity to produce a Sodium Hypochlorite by passing electric current through water. This disinfect the water by the MMO Anode [More]

Posted in: 500 GPH | brine chlorination | CHLORINATOR | disinfection | Electrochlorinator | General | MMO

Tags: , , , , , , , , , , ,

MMO Coated Titanium Electrolyzer 500 GPH/200 GPH for Brine Chlorination

February 5, 2022 at 10:10 AMadmin
Electro chlorination is the process of generating a solution of Sodium Hypochlorite from three common place and readily available materials - salt, water and electricity. [More]

Posted in: 200 GPH | 500 GPH | BRINE BASED | MMO | Titanium

Tags: , , , , , , , , , , , , ,

Electro Chlorinators for Brine Chlorination

September 4, 2021 at 12:20 PMadmin
The process of electrolysis involves using an electrical current to bring about a chemical change and make new chemical. [More]

Posted in: 100 GPH | 400 GPH | 500 GPH | brine chlorination | CHLORINATOR | disinfection | drinking water | Electrochlorinator | MMO | Titanium

Tags: , , , , , , , ,

Tiaano design, fabrication and supply of electrolyzers 500 GPH for brine chlorination

June 19, 2021 at 9:55 AMadmin
Tiaano design, fabrication and supply of electrolyzers 500 GPH for brine chlorination  The process of Electro chlorination is simple. It is the electrolysis of salt water to produce a chlorinated solution. The electric current passes through the seawater (or brine). This disinfects the water and makes it safe for the operators of the chlorinators as there is no handling of chlorine gas, which is highly toxic and corrosive. A risk assessment is required as hydrogen released is flammable &... [More]

Tiaano, our recent supply of Continuous type Electrolyzers 250 GPH and 500 GPH to Denmark for the application of Brine Chlorination

June 2, 2021 at 4:20 PMadmin
Electro chlorination is an electrochemical process used to generate chlorine based disinfected by passing an electric current through salt (or sea) water. Electrolyzers are used to disinfect the water and also make it is safe for human use. [More]

Supply of Electrolyzer 500 GPH to Rajasthan for Brine chlorination

May 12, 2021 at 12:47 PMadmin
We design the cells to consume 3.5 to 4.0 DC Voltages, with the MMO coating of 5 years guarantee, life may extended further two to three years. Over 1,000 of installations all over the world, Customers are supported through an international network of agents in over 63 countries. [More]